East Jordan, MI Heating, Cooling, Plumbing, and Generator Experts You Can Count On

Conducted on-site assessment for whole-home water filtration or treatment system installation. Evaluated existing plumbing infrastructure including water heater connections, supply lines, and available installation space in utility area. Documented current system configuration with brass fittings, flexible supply lines, and PEX piping. Observed evidence of previous water staining on concrete floor near water heater base, indicating potential water quality concerns that support need for filtration system. Photographed existing plumbing layout and connection points to develop comprehensive quote for recommended water treatment solution.

Replaced hot water supply line to lavatory with new installation including shutoff valve. Installed customer-provided cartridge and stem assembly to restore proper fixture operation. All work completed per quoted specifications with system tested and verified operational.

Completed inspection correction follow-up after initial no-contact visit. Upon consultation with homeowner, identified need for vehicle impact protection in area where snow removal equipment operates. Assessed site conditions and documented existing wooden lattice barrier placement between residential structure and adjacent garage area. Confirmed protection requirements to prevent damage from snow plow operations in designated push zone.

Responded to water leak service call for mobile home with three separate leak locations identified in crawlspace area. Inspected and addressed leak at north end bathroom, leak under kitchen sink, and intermediate leak between bathroom and kitchen areas. Repaired valve that was spraying water when water pump activated. Accessed crawlspace beneath structure to locate and repair all three leak points, documented conditions with photos showing foundation area and plumbing infrastructure.

Installed customer-supplied toilet and faucet at the service location. Coordinated with customer regarding work order details and completed installation per specifications, with all work photographed for documentation purposes.

Returned to installation site to complete water heater system modifications. Installed support bracket for expansion tank to ensure proper mounting and code compliance. Performed repiping work on copper supply lines, including new brass fittings and shut-off valves to improve system configuration and accessibility. Secured dual expansion tanks with metal hose clamps and verified all connections for proper operation. Total work time approximately three hours. Documentation photos captured showing completed installation with properly supported expansion tanks, updated copper piping connections, and water heater assembly in utility closet.

Conducted on-site assessment for water heater replacement estimate along with water softener installation including shut-off valves for both units. Inspected existing water heater showing significant age-related deterioration with extensive staining and discoloration on exterior surfaces, indicating prolonged exposure to moisture and environmental conditions. Documented current equipment specifications from manufacturer labels including temperature ratings and model information. Photographed installation area showing wooden platform base and existing plumbing connections in unfinished utility space. Evaluated space requirements and existing infrastructure for proposed water heater and softener system installations with appropriate isolation valves for future maintenance accessibility.

Conducted on-site assessment of existing HVAC system for air conditioning estimate. Evaluated current thermostat functionality, inspected furnace unit and ductwork configuration in utility area, documented equipment condition and spatial constraints, and photographed existing installation to develop comprehensive replacement or upgrade proposal.

Converted gas range fittings from natural gas to liquid propane (LP) for newly installed stainless steel slide-in range. Customer supplied all necessary LP conversion components; technician performed labor to complete the conversion and ensure proper operation of the five-burner cooktop.

Completed comprehensive tune-up on 25-year-old Generac generator unit. Identified and repaired faulty wire connections at battery terminals that were causing poor electrical contact. Verified battery condition (new unit) and secured all connections to manufacturer specifications. Performed standard maintenance procedures including air filter inspection, oil level verification, and visual inspection of all engine components and fuel system connections.

Responded to customer report of leaking water heater in basement utility area. Upon inspection, observed water pooling at base of white cylindrical water heater unit with visible moisture accumulation on floor. Documented existing equipment configuration including galvanized vent piping, multiple connection points at top of unit, and current installation against wood-paneled walls in cluttered storage space. Photographed water heater specifications, surrounding plumbing infrastructure including insulated pipes, and basement mechanical room conditions to provide comprehensive estimate for water heater replacement.

Conducted sales estimate for boiler replacement in residential property. Documented existing aged heating equipment showing significant wear, deterioration, and accumulated debris on metal surfaces and components with visible BTU rating plates. Assessed ductwork system including ceiling-mounted flexible metallic ducting with mounting flanges and evaluated overall HVAC infrastructure condition to provide comprehensive replacement recommendations.

Conducted comprehensive site assessment for whole home generator and mini-split system installation. Evaluated existing electrical infrastructure including main service panel with 5270 KAIC rating and Stratus IQ Watthour meter (CL200 240V 3W configuration) to determine compatibility and capacity requirements for proposed equipment. Documented current electrical service conditions and photographed key components to develop accurate estimate for generator transfer switch integration and HVAC system additions.

Completed full installation of Bryant furnace system, Puron Advance air conditioning unit, and water heater at residential property. Interior furnace installed in utility closet with proper ventilation ductwork including 90-degree elbow configuration, exterior AC unit positioned on gravel pad with electrical disconnect mounted to exterior wall, and water heater installed with copper piping connections. All equipment properly labeled, vented, and tested for operation with standard residential HVAC installation practices followed throughout.

Conducted sales estimate for air conditioning system replacement. Existing condenser unit sustained ice damage and requires full replacement. Customer opted to replace the 410A refrigerant condenser rather than pursue repairs. Evaluated current outdoor condenser unit showing weathering and age-related deterioration in addition to ice damage. Assessed installation site conditions including concrete pad placement, clearances, and accessibility for equipment replacement. Documented equipment specifications and site conditions to provide accurate replacement estimate for new condenser unit installation.

Conducted sales estimate for furnace replacement in residential property. Documented existing HVAC system components including GE SmartWater PowerVent water heater (Model GPM10T67LH1, manufactured 06/2007) with 40,000 BTU input capacity rated for liquid petroleum fuel, along with associated ductwork, copper plumbing lines, and mechanical room infrastructure showing age-related wear and accumulated debris. Photographed equipment specifications and utility space conditions to provide comprehensive assessment for heating system upgrade proposal.

# HVAC Noise Diagnostic Responded to report of high-pitched whistling noise from AC unit. Performed diagnostic inspection of the system, accessing the electrical control panel and internal components. Documented capacitor specifications (50.0+5.0 MFD) and examined terminal blocks, contactors, and control board for potential noise sources. Inspected interior mechanical components and refrigerant line configuration. Captured photographic documentation of electrical panel wiring, capacitor condition, and internal component layout for service records.

Responded to no cooling and no heating call on 5-year-old Bryant system. Customer had recently replaced fuse and thermostat prior to service visit. Upon arrival, performed complete system diagnostics on both furnace and air conditioning condenser unit. Identified and resolved electrical supply issue preventing both heating and cooling operation. Verified proper voltage at disconnect, tested thermostat wiring and communication, and confirmed system startup. Cycled both heating and cooling modes to ensure full functionality restored. Unit operating within manufacturer specifications at time of departure.

Completed routine annual heating system maintenance as part of membership service. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of all components, and documented system condition with photos. Unit appears to be in good working order with no issues identified or repairs needed at this time.

Provided quote for installation of new hose bib. Assessed existing plumbing connections and determined optimal placement for exterior water faucet replacement.